Cisco Meraki Configuration

Configuring Cisco Meraki to forward events

Following are the steps to configure your Cisco Meraki device:

To configure Cisco Meraki device to forward syslog events, follow the below steps.

• You can forward syslog messages from Meraki MX security appliances, MR access points, and MS switches.
• Log into the Meraki dashboard.

• Go to Network-wide > Configure > General.

• • Click Add a syslog server.
  • Enter the forwarder IP address.
  • Enter 11558 in the Port field.
  • In the Roles field, select all logging roles, including (if applicable) Appliance Event Log, Switch Event Log, and Wireless Event Log.

• Click Save.
  Now the configuration is completed, and logs will start ingesting into chronicle.

Sample Logs

The following are the logs that Cisco sends to Chronicle.

<134>1 1688624159.974875708 Silver_Boca_FW01 ip_flow_start src=10.0.0.1 dst=0.0.0.0 protocol=tcp sport=59017 dport=443 translated_src_ip=192.168.1.1 translated_port=59017