In this article:
Configuring Syslog for Cisco UCS to forward syslog events
Take the following steps to configure your Cisco UCS
Steps to Configure Syslog to a Local File
- Log in to Cisco UCS Manager.
- In the navigation pane, choose the Admin tab.
- Expand Faults, Events, and Audit Log, then choose Syslog.
- In the work pane to the right, under File, choose enabled for the Admin State.
- Choose the alarm level from the drop-down menu.
- Click Save Changes.
Steps to Configure Syslog to a Remote Syslog Server
This configuration procedure assumes that a syslog server was configured and is operating in the network.
- Log in to Cisco UCS Manager.
- In the navigation pane, select the Admin tab.
- Expand Faults, Events, and Audit Log, then choose the Syslog option.
- In the work pane to the right, enable Remote Server, enter the IP address of the forwarder, select the appropriate Level which is informational, and Facility as Local6.
- Assign port as 11676
- Click Save Changes.
You should begin to see events logged on to your syslog server and local files on Cisco UCS.
Reference:
https://www.cisco.com/c/en/us/support/index.html?referring_site=bodynav
Comments
0 comments
Please sign in to leave a comment.